How to get rid of the static noise in your radio?

Essentially, broadcasting static during a call on is a sign the signal strength is degrading (or that there is no sound coming through at all). When signal strength degrades amply, the static noise emerges. 

When there’s no communication coming through, it is a slightly different story. A two way radio has what’s acknowledged as a ‘squelch’ regulate circuit that maintains tabs on the signal power. The squelch circuit will quiet the speaker when it realizes that there’s no signal coming through into the radio. It’s, fundamentally, the same function as your TV has as soon as it cuts off an unavailable network after a preset time. Though, within the moments before your walkie talkie ‘squelches’ the signal, you will hear static, or ‘white noise’ as it is also named. 

‘Squelching’ is a fairly vital a part of any/all broadcasting equipment. The strategy used in your 2 way radio is called a ‘carrier squelch’ and is more likely to be manually regulating. 

From Wikipedia (as of may 2013): 

“A carrier squelch or noise squelch is the most simple variant of all. It operates strictly on the signal strength, such as when a television mutes the audio or blanks the video on “empty” channels, or when a walkie talkie mutes the audio when no signal is present. In some designs, the squelch threshold is preset. For example, television squelch settings are usually preset. Receivers in base stations at remote mountain top sites are usually not adjustable remotely from the control point.

In devices such as two-way radios (also known as radiotelephones), the squelch can be adjusted with a knob, others have push buttons or a sequence of button presses. This setting adjusts the threshold at which signals will open (un-mute) the audio channel. Backing off the control will turn on the audio, and the operator will hear white noise (also called “static” or squelch noise) if there is no signal present”. 

So what’s ‘white noise?’ In accordance to Joe Shambro, writing for About.com’s handbook to household video recording, 

“White noise is a static sound that has equal energy on every frequency. Think about this for a second: every frequency from 20Hz to 20kHz is equally represented at the same velocity; this type of frequency scale is called a “linear” scale. This gives the noise a uniform, static sound that the human ear detects as somewhat harsh and heavy-handed toward the high frequencies. However, white noise represents a very unnatural way of presenting frequency data in terms of how our ears work.” 

 If you’re experiencing sound reduction on your walkie talkie, there may be several reasons for this. ‘Wireless Woman’ a blogger with an brilliant website about two way radios, has this to say:

“Signal loss can happen in any number of places in the system. Antennas may not properly direct the signal toward the horizon. Cables to repeaters may need replacement. Connectors can be corroded. Finally, the quality of the system may not be adequate. The old adage “you get what you pay for” certainly applies to two-way radios, and their quality does vary. Receiver specifications, engineering, tuning, the antenna, and even design generally improve as the price increases. This really happened: Two public safety officers were at a scene. One was using a radio that cost more that twice as much as the other. Guess which one could hear and which one couldn’t?” 

So there you go.

Post Navigation